E) Aux/Optical Mode; Bluetooth Mode - Renkforce TB230 Bedienungsanleitung

e) AUX/OPTICAL mode

• Make sure the TV or audio device is connected to the TV soundbar.
• Press the SOURCE (2) button repeatedly or press one of the audio source buttons (18) to select AUX 1,
AUX 2 or OPTICAL as audio source.
• Start playback on your audio device.
If there is no sound in OPTICAL mode and the optical input LED indicator (10) is flashing,
check the audio settings on your audio device (e.g. TV). Set the audio setting to PCM mode.
• Press the VOL + / VOL– buttons to set the volume accordingly.
The device automatically turns on from standby mode if connected via AUX 1 or AUX 2 to the
headphones/audio socket of a computer and detecting a sound.
f) Bluetooth mode
When connecting your Bluetooth-activated device to the TV soundbar for the first time, it is necessary to
pair both devices. After pairing, the TV soundbar will recognize the Bluetooth device automatically once
you switch on the Bluetooth mode. Please note though, that establishing the connection might take several
seconds. If the connection cannot be established within 2 minutes, the TV soundbar will switch to the
previously connected audio source.
The transmission range is approx. 8 m in line of sight. Any objects between Bluetooth devices can
reduce the transmission range.
Check the specifications of your Bluetooth device before pairing. We cannot guarantee
compatibility with all devices. Some mobile devices require a password for pairing. Enter "0000"
in such a case.
If the Bluetooth signal is weak, the connection with the TV soundbar might get disconnected.
Once the signal is strong again, the connection will be re-established automatically.
Establish the Bluetooth connection as followed:
• Turn on the TV soundbar using the on/off switch
button (18) to activate the Bluetooth mode. The Bluetooth indicator (9) lights up blue.
• Press and hold the ►II / PAIR (3, 22) button for approx. 3 seconds. The TV soundbar activates the pairing
mode and emits "Pairing" as an acoustic confirmation message. The Bluetooth indicator flashes quickly.
• Activate Bluetooth on your mobile device (e.g. smartphone) and start searching for Bluetooth devices.
The TV soundbar will appear on the display of your mobile device indicated by the name "renkforce
TB230". Select "renkforce TB230" for pairing. The TV soundbar emits "Paired" as an acoustic
confirmation message and the Bluetooth indicator lights up steadily.
• Start playback on your mobile device.
. Press the SOURCE button (2) repeatedly or the BT
33