Installing The Unit (In-Dash Mounting) - Kenwood KDC-BT710DAB Bedienungsanleitung

INSTALLATION/CONNECTION

Installing the unit (in-dash mounting)

Orientate the trim plate as
illustrated before fitting.
How to remove the unit
1 Detach the faceplate.
2 Fit the catch pin on the extraction keys into the holes on
both sides of the trim plate, then pull it out.
3 Insert the extraction keys deeply into the slots on
each side, then follow the arrows as shown on the
illustration.
30
ENGLISH
Hook on the top side
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
Do the required wiring.
( 31)
Dashboard of
your car
Part list for installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key