Kenwood KDC-BT710DAB Bedienungsanleitung Seite 28

TROUBLESHOOTING
Symptom Remedy
Press and hold M to forcibly eject the disc. Be careful not
Disc cannot be ejected.
to drop the disc when it is ejected. If this does not solve
the problem, reset the unit. ( 3)
Noise is generated. Skip to another track or change the disc.
Tracks do not play back as Playback order is determined when files are recorded.
you intended them to play.
"READING" keeps Do not use too many hierarchical levels or folders.
flashing.
Elapsed playing time is This is caused by how the tracks are recorded.
not correct.
"LOADING" appears when This unit is still preparing the iPod/iPhone music list. It
you enter search mode by may take some time to load, try again later.
pressing .
• This unit can only display uppercase letters, numbers,
Correct characters are not
displayed (e.g. album and a limited number of symbols.
• Depending on the display language you have selected
name).
( 5), some characters may not be displayed correctly.
"NA FILE" Make sure the disc contains supported audio files. ( 26)
"NO DISC" Insert a playable disc into the loading slot.
"TOC ERROR" Make sure the disc is clean and inserted properly.
"PLEASE EJECT" Reset the unit. If this does not solve the problem, consult
your nearest service center.
"READ ERROR" Copy the files and folders onto the USB device again. If this
does not solve the problem, reset the USB device or use
another USB device.
"NO DEVICE" Connect a USB device, and change the source to USB again.
24
ENGLISH
Symptom Remedy
"COPY PRO" A copy-protected file is played.
"UNSUPPORTED DEVICE" • Check whether the connected device is compatible with
appears. this unit and ensure the file systems are in supported
formats. ( 26)
• Reattach the device.
"UNRESPONSIVE Make sure the device is not malfunction and reattach the
DEVICE" appears. device.
"USB HUB IS NOT This unit cannot support a USB device connected via a USB
SUPPORTED" appears. hub.
"NO MUSIC" Connect a USB device that contains playable audio files.
• Reconnect the iPod.
"iPod ERROR"
• Reset the iPod.
• Sound cannot • Reconnect the Android device.
be heard during • If in [HAND MODE], launch any media player application
playback. on the Android device and start playback.
• Sound output only • If in [HAND MODE], relaunch the current media player
from the Android application or use another media player application.
• Restart the Android device.
device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. ( 27)
Cannot playback at • Make sure KENWOOD MUSIC PLAY APP is installed on the
[BROWSE MODE]. Android device. ( 10)
• Reconnect the Android device and select the appropriate
control mode.
• If this does not solve the problem, the connected Android
device does not support [BROWSE MODE]. ( 27)