Installing The Unit (In-Dash Mounting); Removing The Unit - Kenwood KDC-BT960DAB Bedienungsanleitung

Installation/Connection

Installing the unit (in-dash mounting)

1
2
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Do the required wiring.
(Page 32)
Dashboard of your car
Bend the appropriate tabs to hold the sleeve
firmly in place.

Removing the unit

1 Detach the faceplate.
2 Fit the catch pin on the extraction keys into the holes on both sides of
the trim plate, then pull it out.
3
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.
31
ENGLISH