Installing The Unit (In-Dash Mounting); Removing The Unit - Kenwood KMM-BT506DAB Bedienungsanleitung

Installation/Connection

Installing the unit (in-dash mounting)

Hook on the top side
Orientate the trim plate
as illustrated before
fitting.
32
ENGLISH
Do the required wiring.
(Page 33)
Dashboard of
your car
Bend the appropriate tabs to hold the
sleeve firmly in place.

Removing the unit

1
Detach the faceplate.
2
Remove the trim plate.
3
Insert the extraction keys deeply into the slots on each side, then
follow the arrows as shown on the illustration.