Remote Access - Fryka TS 50-100 Betriebsanleitung

5.2.1.4.5

Remote access

5.2.1.4.5.1. IP configuration
N
OTE

You should assign a permanent IP address here to enable remote access to the control later.
This must be in the same address range of the network (here: 192.168.4.xxx).
If the control is integrated correctly into the LAN, you can access the control directly via the web
browser of your PC or smartphone using the IP address selected here. To do this, enter "IP
address/mobile" in your browser (e.g., 192.168.4.64/mobile).
The control has an integrated web
server and can be integrated into a
local network
For integration into a network, you must
enter the IP address, subnetwork mask
and the standard gateway (usually the
IP address of the router).
You can obtain the required data from
your network administrator.
Then log in to the logon window with your user data. The
user "ADMIN" with the password "ADMIN" is set as default
value.
Control and operation
57 // 74