Eliminating Minor Faults Yourself; Customer Service - Siemens gs..v serie Gebrauchsanleitung

Eliminating minor faults yourself

Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice, even if the appliance is still under
guarantee!
Fault
Possible cause
Displays do not Power failure; the fuse has been
illuminate. switched off; the mains plug has
not been inserted properly.
Temperature Fault the freezer compartment
display light is too warm!
flashes.
S Freezer compartment door
is open.
S The ventilation openings have
been covered.
S Too much food was placed
in the freezer compartment
at once.

Customer service

Please check your telephone book or the
customer service list for your nearest
customer service facility. When
contacting customer service, please
ALWAYS quote the product number
(E number) and production number
(FD number) of your appliance.
Remedial action
Check whether the power is on, the fuse must
be switched on.
Close the door.
Ensure that there is adequate ventilation.
Do not exceed max. freezing capacity.
When the fault has been eliminated, the
indicator light goes out shortly afterwards.
These numbers can be found on the
rating plate. Fig. 7
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers. This
will save you additional costs.
en
23