Proper Use; Technical Data; Before Starting The Equipment - EINHELL GC-EL 3000 E Originalbetriebsanleitung

3. Proper use

The garden blower vac is designed to handle
only foliage and garden refuse such as grass and
small branches. Any other use is prohibited.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

AC motor ................................220-240V ~ / 50 Hz
Output ............................................... 3000 watts
no load speed n ......................8000-15000 min
0
Protection class ............................................II /
Air velocity .............................................300 km/h
Suction rate ............................................ 840 m
Volume of debris bag ......................... approx. 45 l
Sound volume level L
WA
K uncertainty ........................................... 3 dB(A)
Sound pressure level L
Vibration a .........................................2.648 m/s
hv
K uncertainty ...........................................1,5 m/s
Weight (blower mode). ................................3.0 kg
Weight (vacuum mode) ...............................4.2 kg
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Anl_GC_EL_3000_E_SPK9.indb 20 Anl_GC_EL_3000_E_SPK9.indb 20
-1
/h
3
.................... 102.5 dB (A)
.................... 91.7 dB (A)
pA
2
2
- 20 -
GB
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
5.1 Preparations (Fig. 3a-3f)
Connect the top suction tube (Fig. 3a/Item 2) and
the bottom suction tube (Fig. 3a/Item 1) together.
Make sure that the guide lug (Fig. 3a/Item A) is in-
serted into the corresponding recess (Fig. 3a/Item
B) when you do this. Make sure that it latches in
place correctly as well. Use the suction tube only
if it is fully assembled!
Push the guide wheels (Fig. 3b/Item 9) onto the
bottom suction tube (Fig. 3b/Item 1), as shown in
Fig. 3b, with the lock pressed (Fig. 3b/Item A) and
let it snap into place at the desired position. The
position can be changed at any time by pressing
the lock again. Make sure that it snaps into place
correctly.
Fit the additional handle (Fig. 3c/Item 3) to the
mount on the top suction tube (Fig. 3c/ Item 2).
Using the screw (Fig. 3d/Item 11) and the star nut
(Fig. 3e/Item 12), secure the additional handle in
the desired position.
When fi tting the screw, make sure that you insert
it from the side with the hexagon lock (Fig. 3d/
Item A). The position can be changed at any time
by undoing the star nut. Make sure that the parts
are fastened securely.
20.03.2018 11:18:13 20.03.2018 11:18:13