Proper Use; Technical Data; Before Starting The Equipment - EINHELL GC-EL 2500 E Originalbetriebsanleitung

3. Proper use

The garden blower vac is designed to handle
only foliage and garden refuse such as grass and
small branches. Any other use is prohibited.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

AC motor ................................230-240V ~ / 50 Hz
Output ............................................... 2500 watts
no load speed n ......................7000-13500 min
0
Protection class ............................................II /
Air velocity .............................................240 km/h
Suction rate ............................................ 650 m
Volume of debris bag ......................... approx. 40 l
Sound volume level L
WA
K uncertainty ........................................... 3 dB(A)
Sound pressure level L
Vibration a .........................................2.765 m/s
hv
K uncertainty ...........................................1,5 m/s
Weight ........................................................3.3 kg
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Anl_GC_EL_2500_E_SPK7.indb 17 Anl_GC_EL_2500_E_SPK7.indb 17
-1
/h
3
.................... 100.3 dB (A)
.................... 86.3 dB (A)
pA
2
2
- 17 -
GB
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.

5. Before starting the equipment

Before you connect the equipment to the mains
supply make sure that the data on the rating plate
are identical to the mains data.
Warning!
Always pull the power plug before making
adjustments to the equipment.
5.1. Mounting the suction tube (Fig. 3a-3e)
•
Plug together the front and rear suction tube
(Fig. 3a) and secure with the screw (Fig. 3b/
Item 13).
•
Now slide the complete suction tube into the
motor housing (Fig. 3c) and secure with the
screws (Fig. 3d/Item 12+13).
•
Slide the wheel support (Fig. 3e/Item 13) onto
the front suction tube as far as the stop (Fig.
3e/Item A) and secure with the screw (Fig. 3e/
Item 12).
Note: Please note that the two vacuum tubes
must always be joined together before they
are mounted on the motor housing, and that
they must never be taken apart when moun-
ted!
5.2. Mounting the debris bag (Fig. 4-5)
Hang the hook on the suction tube (Fig. 4 / Item
2). Then slip the debris bag over the socket on the
motor housing; it engages correctly when it ma-
kes an audible click (Fig. 5).
30.11.15 13:49 30.11.15 13:49