What To Do If; Technical Data - IKEA LAGAN Bedienungsanleitung

ENGLISH

What to do if...

Problem
The cooking zones are not
functioning.
The residual heat indicator
is not displaying anything.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a
solution to the problem yourself, contact
your dealer or the After Sales Service.

Technical data

Rating Plate
Made in Germany
© Inter IKEA Systems B.V. 1999
501.823.52
21552
PQM
The graphic above represents the rating
plate of the appliance (without serial num-
ber which is generated dynamically during
the production process), which is located at
its underneath surface of the casing.
Possible cause
The desired heat setting is
not set.
The fuse in the house electri-
cal installation (fuse box)
has been tripped.
The cooking zone was only
on for a short time and is
therefore not hot.
by a registered engineer, the visit from the
customer service technician or dealer may
not take place free of charge, even during
the warranty period.
Model LAGAN HGC3K Typ 58PEE01A0 5.3kW
PNC 949 593 369 01 S NO ................ 220V-240V AC 50-60 Hz
Dear Customer, please apply here aside
the sticker you can find in the dedicate
plastic bag inserted inside the hob packag-
ing. This will allow us to assist you better, by
identifying precisely your hob, in case you
will need in future our assistance. Thank you
for your help!
Remedy
Set the heat setting.
Check the house electrical
installation fuse. If the fuses
trip a number of times,
please call an authorized
electrician.
If the cooking zone is sup-
posed to be hot, call the Af-
ter Sales Service.
If you operated the appliance wrongly,
or the installation was not carried out
9
230 V
DGT