Helpful Hints And Tips; Care And Cleaning; What To Do If - IKEA FRAMTID HGC6T Bedienungsanleitung

ENGLISH
Heat setting
-
-

Helpful hints and tips

When a cooking zone is switched on, it
may hum briefly. This is a characteristic of
all ceramic glass cooking zones and does not
impair either the function or the life of the ap-
pliance.
Energy saving
• If possible, always place lids on the pans.
• Place cookware on the cooking zone before
you switch it on.

Care and cleaning

Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam blasters
or high-pressure cleaners.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and remove
the residues with water and washing up liquid
after each use. Remove also the remnants of
the cleaning agents!
Scratches or dark stains on the glass ce-
ramic that cannot be removed do not af-
fect the functioning of the appliance.

What to do if...

Problem
The cooking zones will
not switch on or are not
functioning.
Downloaded from www.Manualslib.com
Automatic switch off after
6 hours
5 hours
Possible cause
More than 10 seconds passed
since you switched on the hob.
The child safety device is on
manuals search engine
Heat setting Automatic switch off after
-
• The bottom of the cookware should be as
thick and flat as possible.
• Switch cooking zones off before the end of
the cooking time, to take advantage of re-
sidual heat
• Bottom of pans and cooking zones should
be the same size.
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil res-
idues should be removed at once, best tool
for cleaning glass surface is a scraper (not
included with the appliance). Place a scra-
per on the glass ceramic surface at an an-
gle and remove residues by sliding the
blade over the surface. Wipe the appli-
ance with a damp cloth and a little washing
up liquid. Finally, rub the appliance dry us-
ing a clean cloth.
2. Limescale rings, water rings, fat splashes,
shiny metallic discolorations should be re-
moved after the appliance has cooled
down using cleaner for glass ceramic or
stainless steel.
Switch the appliance on again.
. Deactivate the child safety de-
vice (See the section "Child safe-
ty device").
8
4 hours
1.5 hours
Remedy