Daily Use; Helpful Hints And Tips; Care And Cleaning - IKEA LAGAN Bedienungsanleitung

ENGLISH

Daily use

Adjusting the heat setting
Turn anti-clockwise to reduce

Helpful hints and tips

When a cooking zone is switched on, it
may hum briefly. This is a characteristic
of all ceramic glass cooking zones and does
not impair either the function or the life of
the appliance.
Energy saving
• If possible, always place lids on the pans.
• Place cookware on the cooking zone be-
fore you switch it on.

Care and cleaning

Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam
blasters or high-pressure cleaners.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and
remove the residues with water and
washing up liquid after each use. Remove
also the remnants of the cleaning agents!
Scratches or dark stains on the glass
ceramic that cannot be removed do
not affect the functioning of the appliance.
Function
Turn clockwise to increase
Turn to 0 switch off
• The bottom of the cookware should be as
thick and flat as possible.
• Switch cooking zones off before the end
of the cooking time, to take advantage of
residual heat
• Bottom of pans and cooking zones should
be the same size.
Removing the residues and stubborn
residues:
1. Food containing sugar, plastics, tin foil
residues should be removed at once,
best tool for cleaning glass surface is a
scraper (not included with the appli-
ance). Place a scraper on the glass ce-
ramic surface at an angle and remove
residues by sliding the blade over the
surface. Wipe the appliance with a
damp cloth and a little washing up liq-
uid. Finally, rub the appliance dry using
a clean cloth.
2. Limescale rings, water rings, fat
splashes, shiny metallic discolorations
should be removed after the appliance
has cooled down using cleaner for
glass ceramic or stainless steel.
8
Knob
set-
ting
1 - 9
9 - 1
0