Selecting The Spectrum Analyzer (Sa); Labelling A Motion Display - Sony FM/MW/LW Bedienungsanleitung

Selecting the spectrum
analyzer (SA)
The sound signal level is displayed on a spectrum
analyzer. You can select a display for 6 patterns
(Auto, A-1, A-2, B-1 to B-3), or "off."
1
Press (SOURCE) to select a source
(radio, CD, or MD).
2
Press (MENU).
3
Press M or m repeatedly until "SA"
appears.
4
Press < or , repeatedly to select the
desired setting.
5
Press (ENTER).

Labelling a Motion Display

You can label a Motion Display with up to 64
characters to appear when the unit is turned off.
Labels will scroll in the display in the M.Dspl 1
mode (The display remains lit even when the
power is off).
1
Press (OFF).
CD/MD playback or radio reception stops
(the key illumination and display remain on).
2
Press (MENU), then press M or m
repeatedly until "Name Input"
appears.
3
Press (ENTER).
4
Enter the characters.
1 Press (DSPL/PTY) to select the
character type.
A a 0 A
t t t
2 Press M*
1 repeatedly to select the
desired character.
A B C
t t t
2
! "
t ... t t
*1 For reverse order, press m.
*2 (blank space)
3 Press , after locating the desired
character.
If you press <, you can move back to the
left.
4 Repeat steps 1 to 3 to enter the
entire sentence.
5
Press (ENTER).
Tips
• Simply overwrite or enter "
sentence.
• To erase all sentences, press (ENTER) for 2
seconds after step 4.
x y z 0
... t t t t
A
# ...
t t * 2 t
" to correct or erase a
1
25