Quickly Attenuating The Sound; Changing The Sound And Display Settings; Menu - Sony FM/MW/LW Bedienungsanleitung

Quickly attenuating the
sound
Press (ATT) on the card remote
commander.
"ATT on" appears in the display momentarily.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
22
Changing the sound and
display settings

— Menu

The following items can be set:
Set Up
• Clock (page 9)
• CT (Clock Time) (page 19)
• Beep — to turn the beeps on or off.
Display
• D.Info (Dual Information) — to display the
clock and the play mode at the same time (on).
Functions only when SA is not set to B-1 – B-3.
• SA (Spectrum Analyzer) (page 25) — to
change the display pattern of the sound signal
level.
• M.Dspl (Motion Display) — to turn the Motion
Display mode on or off.
– Select "on" to show decoration lines in the
display and activate Demo display.
– Select "off" to deactivate the Motion Display.
• Dimmer — to change the brightness of the
display.
– Select "Auto" to dim the display only when
you turn the lights on.
– Select "on" to dim the display.
– Select "off" to deactivate the Dimmer.
• Contrast — to adjust the contrast if the
indications on the display are not recognizable
because of the unit's installation position.
You can adjust the contrast of the main display
side and the operation side separately.
• A.Scrl (Auto Scroll)
– Select "on" to automatically scroll all
displayed names exceeding 9 characters.
– When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.