Locating A Disc By Name; List-Up; Selecting The Specific Tracks For Playback; Bank/Custom File - Sony CDX-C910RDS Bedienungsanleitung

4
Rotate the dial to select the name that
you want to erase.
5
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6
Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.

Locating a disc by name

— List-up (CD changer with custom file
function or MD changer)
You can use this function for the discs that
have been assigned a custom name. For more
information on disc names, refer to "Labeling a
CD" (page 20).
1
Press (LIST) momentarily.
The name assigned to the disc currently
playing appears in the display.
LST 4 SCHUBERT
5 BACH
EQ SUR
2
Press (LIST) repeatedly until you find the
desired disc.
3
Press (5) (ENTER) to play back the disc.
Notes
• To turn off the display, press (DSPL). Once a disc name
has been displayed for five seconds, the display goes back
to its normal playback mode.
• The track name are not displayed during MD playback.
• If there are no discs in the magazine, "NO Disc" appears
in the display.
• If a disc has not been assigned a custom file, "********"
appears in the display.
• If the disc information has not been read by the unit, "?"
appears in the display. To load the disc, first press the
number button, then choose the disc that has not been
loaded.
• The information is appears only in upper cases. There are
also some letters which cannot be displayed (during MD
playback).
Actual total number:
Selecting the specific
tracks for playback

— Bank/Custom File

(CD changer with custom file function)
If you label the disc, you can set the unit to
skip tracks and play only the tracks you want.
1
Start playing the disc and press (SHIFT).
Then press (3) (P.MODE) for two
seconds.
Bank edit mode.
CD1 Bank edit
2 2
EQ SUR
DISC TRACK
Note
If you have not labeled the disc, the bank edit mode
does not appear and the programme edit mode appears.
To go back to the normal playback mode, press (3)
(P.MODE) for two seconds.
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (5) (ENTER).
CD1 Bank edit
2 4
EQ SUR
DISC TRACK
The indication changes from "Play" to
"Skip." If you want to return to "Play,"
press (5) (ENTER) again.
3
Repeat step 2 to set the "Play" or "Skip"
mode on all the tracks.
4
Press (3) (P.MODE) for two seconds.
The unit returns to the normal CD playback
mode.
5
Press (SHIFT).
Notes
• You can set the "Play" and "Skip" mode on up to 24
tracks.
• You cannot set the "Skip" mode on all the tracks.
E
Sony CDX-C910RDS (
Play
Skip
,F,G) 3-856-717-11(2)
EN
21