Cleaning And Maintenance - EuroLite LED TMH-X5 Bedienungsanleitung

159
175
191
207
223
239
0
18 26
126
131
19 27
0
0
20 28
80
100

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The cooling-fan should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
174 9F AE 62%
190 AF BE 69%
206 BF CE 75%
222 CF DE 81%
238 DF EE 87%
255 EF FF 94% 100%
125 00 7D 0%
130 7E 82 49%
255 83 FF 51% 100%
255 00 FF 0%
79 00 4F 0%
99 50 63 31%
255 64 FF 39% 100%
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
68% S
Chaser 4
75% S
Chaser 5
81% S
Chaser 6
87% S
Chaser 7
93% S
Chaser 8
S
Chaser 9
Chaser speed
49% F
With decreasing speed backwards
51% S
No function
F
With increasing speed forwards
Chaser fade
100% F
Fading
Reset
31%
S No function
39%
S Reset all motors
S No function
34/35 00091726.DOC, Version 1.1