Control Board - EuroLite LED TMH-X5 Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or make a reset.
The main menu is accessed by pressing the Menu-button. Browse through the menu by pressing Up or
Down. Press the Enter-button in order to select the desired menu. You can change the selection by pressing
Up or Down. Confirm every selection by pressing the Enter-button. You can leave every mode by pressing
the Menu-button. The functions provided are described in the following sections.
Default settings shaded.
Main menu
Address
CH Value
Function
Slave
Auto
Music
Temp Inf
Info
Soft Inf
Status
Person
Temp C/F
Default
Reset
Reset
Adjust Calit CH
Standard
Mode set
Zone
Sub menu
001 -XXX
PAN ...
Slave
Master-A/Alone-A
Master-M/Alone-M
Head Temp
V X.X.X ...
PAN Rev
TILT Rev
P-Degree
M Speed
Mic Sens
C/F switch
ON/OFF
Password
PAN
TILT
28/35
Display
XXX°C/°F
ON/OFF
ON/OFF
360/540
Speed1/Speed2
0~99%
Password=XXX
PAN=XXX
TILT=XXX
00091726.DOC, Version 1.1
Function
DMX address
setting
DMX indicator
Slave setting
Auto program
Music control
Inside temperature
Software version
Reverse movement
Select PAN-angle
360° or 540°
Adjust PAN/TILT
speed
Mic sensitivity
Select temperature
designation °C or °F
Reload Default
Reset all
Calibration to
standard position
password „050"
Setting DMX
channel mode