Replacing The Fuse; Technical Specifications - EuroLite LED TMH-X5 Bedienungsanleitung

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuse-holder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX control channels:
DMX512 connection:
Sound-control:
Number of LEDs:
LED type:
Beam angle:
Maximum PAN-movement:
Maximum TILT-movement:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Accessory:
TPC-10 Coupler, silver
DMX cable XLR 3pin 3m bk
DMX cable IP 3pin 3m bk
PowerCon connection cable 3x1.5 1.5m
Please note: Every information is subject to change without prior notice. 01.10.2015 ©
100-240 V AC, 50/60 Hz ~
220 W
20/28
5-pin and 3-pin XLR
via built-in microphone
19
12 W COB, RGBW
1° - 28°
540°
270°
320 x 220 x 440 mm
10 kg
: 45° C
a
(steady state): 55° C
C
0.5 m
0.3 m
T 3 A, 250 V
No. 59006856
No. 30227810
No. 3022783C
No. 3023503L
35/35 00091726.DOC, Version 1.1