Introduction; Package Contents - Guntermann & Drunck MultiPower-6 Installationsanleitung

Introduction

The central power supply
maximum power consumption permitted per device is 1.2A.
Power Out 1 Power Out 2
Status Status
12VDC/1,2A 12VDC/1,2A
Use power loop cables to connect the Mini-DIN 4 sockets of up to six devices to one
of the Mini-DIN 4 sockets of the central power supply.
Two internal power packs ensure the redundant power supply of the
The LEDs on the front and the back panel show the device's operating status and
the load of all active devices.
You can use the service menu to configure the device and call up different informa-
tion.

Package contents

 1 × central power supply
 6 × power loop cables
 2 × power cable
 1 × USB service cable
 1 × manual
supplies up to six devices with 12 Volt. The
MultiPower-6
Power Out 3 Power Out 4 Power Out 5
Status Status Status
12VDC/1,2A 12VDC/1,2A 12VDC/1,2A
MultiPower-6
Power Out 6 Power
Status Load Service Red.
Main
12VDC/1,2A
MultiPower-6
MultiPower-6 · 2
Introduction
Main Power Red. Power
.