Respekta CH 22035 IXA Bedienungsanleitung Seite 66

Changing the illuminant -LED
1. Disconnect the appliance from the energy supply.
2. The Illuminant should have cooled down before you remove it.
3. Consult the figures for the next steps.
4. Insert a small screwdriver into the gap between the illuminant and the housing of the
appliance.
5. Pull the illuminant carefully out of the hole and disconnect the energy supply wire.
6. Now connect the new illuminant to the energy supply wire.
7. Push the wires back into the hole and fix the new illuminant.
figures similar
66