JUMO eTRON T Betriebsanleitung Seite 38

Parameter Meaning
Filter time constant
For adapting the digital input filter.
At a signal step, 63% of the changes are registered after the filter time con-
stant has elapsed.
Values between 0.1 and 0.7 are interpreted as 0.8 (sampling time).
If the filter time constant is long:
- high damping of interference signals
- slow reaction of the process value display to process value changes
H
Return to the first parameter SP of the parameter level by pressing
Value range
from...factory-set...to
0.1 ... 0.8 ... 99.9 s
> 3 sec.
13