Pioneer AVH-P7500DVDII Installationsanleitung Seite 7

Violet/white
Yellow/black
If you use an equipment with Mute function, wire this
lead to the Audio Mute lead on that equipment. If not,
keep the Audio Mute lead free of any connections.
WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO
DETECT PARKED STATUS AND MUST BE CONNECTED TO THE
POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER
CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE
LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
Connection method
1. Clamp the lead.
Note:
• The position of the parking brake switch depends
on the vehicle model. For details, consult the
vehicle Owner's Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking
brake switch.
Blue/white
To system control terminal of the power amp
(max. 300 mA 12 V DC).
Blue (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
See the section "When connecting
with a rear view camera".
Power supply side
Ground side
2. Clamp firmly with
needle-nosed
pliers.
Parking brake
switch
Fig. 4
6