Pioneer PDP-503MXE Bedienungsanleitung Seite 13

Illustration depicts PDP-503MXE model.
8Ω ~16Ω
R
SPEAKER
+ –
1
8
Synchronizing signal impedance selector switch
Depending on the connections made at INPUT2, it
may be necessary to set this switch to match the
output impedance of the connected component's
synchronization signal.
When the output impedance of the component's
synchronization signal is below 75 Ω, set this switch
to the 75 Ω position (pages 12, 14).
9
AUDIO INPUT (Stereo mini jack)
Use to obtain sound when INPUT1 or INPUT2 is
selected.
Connect the audio output jack of components
connected to INPUT1 or INPUT2 to this unit (page 14).
0
AUDIO OUTPUT (Stereo mini jack)
Use to output the audio of the selected source
component connected to this unit to an AV amplifier
or similar component (page 14).
CONTROL COMBINATION RS-232C
IN OUT
IN OUT
2 3 4
Part Names and Functions
AC INLET
- =
INPUT1
(ON SYNC)
OUTPUT
G B
ANALOG RGB (ANALOG RGB)
5 6
-
MAIN POWER switch
Use to switch the main power of the unit on and off.
=
AC INLET
Use to connect a power cord to an AC outlet (page
15).
~
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 -16 Ω (page 14).
8Ω ~16Ω
L
SPEAKER
+ –
~
INPUT2 AUDIO
(H/V SYNC)
R HD VD INPUT OUTPUT
(INPUT1/2)
75 2.2
Ô
Ω
kΩ
7 89 0
9
En