Safety Instructions - Ferm BGM1008 Gebrauchsanweisung

GB
Features
Fig. A
1. On/off switch
2. Support
3. Cover glass
4. Cover glass holder
5. Screw
6. Grinding stone wet
7. Water reservoir

2. SAFETY INSTRUCTIONS

In this manual and/or on the machine the following symbols are used:
Read instructions carefully
In accordance with essential applicable safety standards of European directives
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains electricity in the case that the cord gets
damaged and during maintenance
Keep bystanders away
Wear ear and eye protection
Faulty and/or discarded electrical or electronic apparatus have to be collected at the
appropriate recycling locations.
Special safety instructions
When using the machine for the first time
• Never use the tool without the PRCD delivered with the tool.
• Keep water clear off the electrical parts of the tool and away from persons in the working
area.
• If the mains cable has been damaged, it must be replaced with a special mains cable.
These can be obtained from the manufacturer or the manufacturer's customer service
4
Ferm Ferm 81