Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Safety; Product Information - Ferm RCM1002 Gebrauchsanweisung

18 volt akku-säbelsäge
Inhaltsverzeichnis

Werbung

/
E
3mm.
).
.
,
(
)
(
.
.
,
.
,
.
,
,
,
.
.
.
.
,
.
.
78
,
.
.
,
.
.
ı
CE
(
:
prEN50260-1, prEN50260-2-1,
).
prEN50260-2-2, EN55014-1, EN55014-2,
EN60335-1,EN60335-2-29, EN61000-3-2,
EN61000-3-3
98/37/
73/23/
89/336/
01-01-2004
ZWOLLE NL
W. Kamphof
.
.
10. Before cleaning or servicing the charger or battery
block, always pull the plug from the charger socket.
11. Never charge the battery block when the ambient
temperature is below 10°C or above 40°C.
12. The air vents in the charger must never be blocked.
,
,
13. The battery block must not be short-circuited.
.
A short-circuit will cause a high current to flow. This
.
may result in overheating, the danger of fire or
explosion of the battery block. This may damage
the battery block or the user may risk an accident.
.
Therefore:
1. Do not connect any cables to the poles of the battery
block.
2. Take care that there are no metal objects (nails,
paper clips, coins, etc.) on the contact surface of the
/
battery block.
Ferm
3. Do not expose the battery block to water or rain.
4. Only use the battery block supplied in combination
with this cordless drill/screwdriver so as to avoid faults
and/or risks to persons.
( GR )
14. A damaged battery block or one that can no longer
be charged must be disposed of as special waste. Do
not discard it with household waste.
15. Never throw the battery block onto a fire or into
water. This will risk explosion!
16. The equipment is intended for use as a saw. All other
uses are explicitly excluded.

ELECTRICAL SAFETY

Always check whether your battery voltage
matches that shown on the rating plate. Also find
:
out whether your mains voltage matches the input
voltage of the charger.
The battery charger is doubly insulated in
compliance with EN60335; it therefore does not
require earthing.
Replacing cables or plugs
Dispose of old cables or plugs immediately they are
replaced by new ones. Connecting a plug on a loose
cable to a socket is dangerous.
Ferm
Ferm

PRODUCT INFORMATION

Figure A
1 Handgrip
2 On/Off Switch
3 Switch Lock
4 Saw Blade
5 Guide Shoe
6 Hexagonal Spanner
7 Battery
SYMBOL MARKINGS
Ambient Temperature maximum 40° C
Hazardous waste, for special disposal
Do not throw into water
Do not throw into fire
Recycling
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Fcr-18kn

Inhaltsverzeichnis