06/2011
1002410-03
5.22.2
Replacing the AQUA FRESH canister
–
Opening the bed base: see page 43.
–
Remove the canister.
–
Unscrew the lid on the new canister.
–
Remove the lid with the hose from the old canister.
–
Screw the lid with the hose onto the new canister.
–
Push the hose well down so that it touches the bottom of the canister.
–
Put the canister back in the device.
–
Close the bed base. You should hear the bed base click into place.
Venting
NOTE:
Ventilate after changing the canister by switching over to
preset mode and then select Function 231 (see
'Voreinstellungen/Presettings', Order-no. 1008953-..).
Cleaning and maintenance
Operating instructions – 61