Cleaning Or Replacing The Interior Lights - ergoline AFFINITY 500 SUPER POWER Gebrauchsanweisung

06/2011 1002410-03
– Remove the screws and then remove the lamp cover.
Replacing the lamps: see page 45.
Replacing the starter: see page 46.
The assembly is the same process in reverse order.
When assembling please note:
– The bed base must lock with an audible click when closed.
5.14 Cleaning or replacing the interior
lights
The interior lighting is located behind the UV low pressure lamps.
– Removing the canopy panel: see page 41.
Cleaning and maintenance
Operating instructions – 51