IKEA GRÄNSLÖS 703.491.53 Bedienungsanleitung Seite 14

ENGLISH
Clock function
END
Press again and again to
switch between the clock
functions.
To confirm the settings of the
clock functions, press
seconds for an automatic
confirmation.
Setting the DURATION or END function
during cooking function
1. Press again and again until the
display shows
or flashes in the display.
2. Press or to the set the values and
press to confirm.
For Duration first you set the minutes
and then the hours, for End
the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
time setting flash in the display. The oven
stops.
3. Press any button or open the oven door
to stop the acoustic signal.
If you press
hours for DURATION
appliance goes to setting of the
END function.
Setting the MINUTE MINDER
1. Press again and again until
"00" flash in the display.
To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration and
End at the same time (time delay), if the appliance is to
be activate and deactivate automatically later.
or wait 5
or .
first you set
or symbol and
when you set the
, the
and
Application
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in minutes
and seconds. When the time you set is
longer than 60 minutes, the symbol
comes on in the display.
The appliance now calculates the time in
hours and minutes.
3. The MINUTE MINDER starts
automatically after five seconds.
After 90% of the set time, an acoustic
signal sounds.
4. When the set time ends, an acoustic
signal sounds for two minutes. "00:00"
and flash in the display. Press any
button to stop the acoustic signal.
If you set the MINUTE MINDER
when the DURATION
function operates, the symbol
comes on in the display.
Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates.
Press again and again until the display
shows time without clock symbols.
You cannot use the Count Up
Timer when the Duration
End function operates.
14
or END
or