Troubleshooting - Online USV XANTO S-Serie Benutzerhandbuch

8.

Troubleshooting

The XANTO S is designed for automatic operation and reports any
occurring problems during operation automatically. Normally, the
warning messages shown on the control panel do not mean that the
output voltage is affected. It is usually a preventative message in-
tended to make the user aware of a problem.

Active warning/error messages are shown in the display with
red background illumination and black text (see Operating
states)

Active warning/error messages are additionally indicated by
an audio alarm signal (see Operating states)

Rectify the cause of the problem or contact support
Check the status menu on a list of active warning/error messages:
1. Press the
options.
2. Press the
3. Press the
messages.
Check the event log for the progression of warning/error messages
and events:
1. Press the
options.
2. Press the
3. Press the
XS6000+XS10000_manual_ger_eng_it_V1.1.1.doc
NOTE
button for at least one second to enable the menu
button until the "UPS STATUS" is displayed.
button to display the list of active warning/error
button for at least one second to enable the menu
button until "EVENT LOG" is displayed..
button to display a list of active status messages.
131 / 216
T R O U B L E S H O O T I N G
R. Kistler