3. Unscrew the mounting bracket of the UPS system on the front
side of the rack and pull the UPS system out of the rack
(see Figure 36).
Figure 36: Removing the XANTO S 6000, step 3/3
4. Unscrew and remove the 19" mounting bracket from the UPS
system.
5. The installation of the new UPS system is done in the reverse
order.
XANTO S 10000
1. Remove the safety cover from the maintenance which.
Unscrew the two screws to do this. Switch the maintenance
switch to bypass (see Figure 37).
Figure 37: Removing the XANTO S 10000, step 1/3
XS6000+XS10000_manual_ger_eng_it_V1.1.1.doc
125 / 216
M A I N T E N A N C E
R. Kistler