Technical Data - Zanussi ZGL643IT Benutzerinformation

If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, speak your dealer or the local Service Force
Centre.
If you operated the appliance incorrectly, or the in-
stallation was not carried out by a registered engi-
1
MOD.
PROD.NO.
SER.NO
DATA
MODEL
1 Stick it on Guarantee Card and send this part
2 Stick it on Guarantee Card and keep this part
3 Stick it on instruction booklet
These data are necessary to help you quickly and correct-
ly. These data are available on the identification plate from
the injectors kit.
• Model description .................

Technical data

Hob dimensions
Width:
Length:
Hob recess dimensions
Width:
Length:
22
2
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
580 mm
500 mm
550 mm
470 mm
neer, the visit from the customer service technician or
dealer may not take place free of charge, even during the
warranty period.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
3
MOD.
PROD.NO.
0049 SER.NO.
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are available at
Service Force Centre and approved spare parts shops.
Heat input
Triple crown burner (ZGL
683IT):
Rapid burner (ZGL 643IT):
Semi-rapid burner:
Auxiliary burner:
TYPE
230V-50Hz
IP20
4.0 kW
3.0 kW
2.0 kW
1.0 kW