Technical Data; Rating Plate - Zanussi ZEV6340XBA Benutzerinformation

Problem
comes on.
comes on.
and a number come on.
You can hear a constant beep
noise.
comes on.
IF YOU CANNOT FIND A SOLUTION...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre. Give the data from the rating plate. Give
also three digit letter code for the glass ceramic (it
is in the corner of the glass surface) and an error
message that comes on. Make sure, you operated

TECHNICAL DATA

RATING PLATE

Model ZEV6340XBA
Typ 60 HAD 54 AO
Ser.Nr. .................
ZANUSSI
COOKING ZONES SPECIFICATION
Cooking zone
Left front
Possible cause
Automatic Switch Off oper-
ates.
Child Safety Device operates.
There is an error in the hob.
The electrical connection is in-
correct.
The second phase of the pow-
er supply is missing.
Nominal Power (Max heat setting)
[W]
2300
the hob correctly. If not the servicing by a service
technician or dealer will not be free of charge, also
during the warranty period. The instructions about
the Service Centre and conditions of guarantee are
in the guarantee booklet.
PNC 949 492 122 02
220 - 240 V 50 - 60 Hz
Made in Romania
6.5 kW
Cooking zone diameter [mm]
210
Remedy
Deactivate the hob and acti-
vate it again.
Refer to "Daily use".
Deactivate the hob and acti-
vate it again after 30 seconds.
If comes on again, discon-
nect the hob from the electrical
supply. After 30 seconds, con-
nect the hob again. If the prob-
lem continues, speak to an Au-
thorised Service Centre.
Disconnect the hob from the
electrical supply. Ask a quali-
fied electrician to check the in-
stallation.
Check if the hob is correctly
connected to the electrical
supply. Remove the fuse, wait
one minute, and insert the fuse
again.
11