Osd Menu Structure; Search And Edit Channel; Auto Scan - AEG CTV 2601 LCD/DVB-T Bedienungsanleitung

6.5 OSD Menu Structure

The OSD (On Screen Display) menu serves to select and set the different functions.
Submenus
Aktive
main menu
Symbols
active menu
Submenus
• Press the arrow buttons / to select a submenu item. Here you can:
- either perform settings with the arrow buttons / .
- or press OK to open a further setting window and perform settings here with the arrow buttons / .
Return to Main Menu
To select a different item from the main menu first exit the active submenu.
• Repeatedly press TV MENU until the main menu header (e.g. CHANNEL) is highlighted.
Exit Menus
• Press the TV MENU button to exit the menus step by step or press the EXIT button to exit the menu. Your changes are
saved.
NOTE: After a few seconds idling the menu disappears automatically.

7. Search and Edit Channel

Your TV set can receive DVB-T signals as well as conventional analogue signals (e.g. via cable). The received channels
during auto scan depend on the connection to the antenna input: your DVB-T antenna for DVB-T reception or analogue
cable tuner. Both methods can be saved in the channel list – but generally you will only use one kind of reception. For
both methods auto scan and manual search are available.
• DVB-T channels are displayed as DTV in the OSD menu.
• Analogue channels are displayed as ATV in the OSD menu.

7.1 Auto Scan

1. Press the TV MENU button to display the OSD menu.
See main menu items below.
2. First press / to select the desired main menu item.
The submenus are displayed next to them.
3. Press / to select a submenu and press OK to
confirm.
4. Press the TV MENU button to return to the main
menu.
1. Press the TV MENU button to display the OSD main menu.
2. Press in CHANNEL menu to select Auto Tuning.
3. Press OK. Press / to select one of three tuning methods (DTV+ATV,
DTV, ATV). Now press .
4. Then press to select the country as your location.
5. Press OK to start Auto Tuning. This will take a few minutes. The
progress is shown on screen.
6. After auto scan channel 1 is displayed.
7. The window closes automatically after a few seconds or press EXIT
to close it.
ENGLISH
57