Hotel Mode - AEG CTV 2601 LCD/DVB-T Bedienungsanleitung

ENGLISH
68
Change Password
1. Highlight the item Set Password and press OK.
2. Enter the old password once and the new password twice.It is valid after second input.
3. Perform further changes or press EXIT to exit the menu.
NOTE:
If you forget your password enter the master password 9527 to select a new password.
Block Programme
You can block individual programmes. These programms can only be accessed after entering the password. The program-
me block is valid until unlocked or resetting the TV set with Restore Factory Default.
NOTE:
The function Block Programme is only available with the function Lock System activated (On).
1. Highlight the item Block Program and press OK.
2. Press or to select the programme to be blocked.
3. Press the green button to block the programme. A lock icon is displayed behind the channel name.
4. Block further programmes or press EXIT to exit the menu. The programmes are blocked.
To unlock access the menu Block Programme and mark the channel to be unlocked; press the green button again. The
lock icon disappears.
Parental Guidance
The menu item Parental Guidance is invalid, as DVB-T broadcasters do not transmit the necessary signal.

15.2 Hotel Mode

1. Press SOURCE and enter 3690 with the numeric buttons.
2. The HOTEL MENU is displayed.
3. Perform the settings with the arrow buttons / .
- Max Volume: Set the maximum volume for the device.
- Contrast Lock: Activate/deactivate the contrast lock. With activated
function the contrast in the PICTURE menu cannot be changed.
- ColorTemp Lock: Activate/deactivate the colour temperature lock.
4. Press EXIT to exit the menu.