Turn Tv Set On And Off; Select Tv Program; Set Volume Level; Quick Access - AEG CTV 2201 Bedienungsanleitung

The basic functions can also be accessed with
the buttons on the TV set. The user manual
generally refers to operating the TV set via
remote control.

5.1 TURN TV SET ON AND OFF

• Press the main switch POWER on the right
to turn the TV set on. It starts in the previous
mode/source.
Press STANDBY on the remote control in
standby mode (status LED is red).
The status LED turns green and the TV
set is turned on (add-on LED lights red).
• Press STANDBY on the remote control to
turn the TV set off into standby mode again.
• Press the main switch on the right to turn the
TV set completely off.
IMPORTANT! Turn the TV set completely off if
you are not using it, as it consumes power even
in standby mode.
After being turned off with the main switch the
TV set is still not disconnected from mains
power. Disconnect from wall outlet to disconnect
from mains power.

5.2 SELECT TV PROGRAM

• Press CH +/- or the numeric buttons 0-9 to
select the desired channel.
• Press RECALL on the remote control to
return to the previous channel.
• Press CH.LIST for an overview of your
channels. Press the arrow buttons and OK
to highlight and select a channel.

5.3 SET VOLUME LEVEL

• Press VOL +/- to set the volume level.
• Press MUTE to temporarily mute the sound.
Press MUTE or VOL+/- to unmute the
sound.

5.4 QUICK ACCESS

AUDIO S elect audio language (only if
supported by broadcaster)
SOURCE Select external device
Set audio
SOUND
PIC Select color mode
SLEEP Set sleep timer
ASPECT Select aspect ratio
P ause playback and display freeze
FREEZE
frame
TEXT Access Teletext
INFO Display program information
SUBTITLE Select subtitle language (only if
supported by broadcaster)

5.5 OSD MENU STRUCTURE

The OSD (On Screen Display) menu helps you
to select the different functions and change
settings.
28
Symbols active
Active main menu
menu
Submenus
Control buttons
. Press TV MENU to display the OSD menu.
The main menu items are displayed above.
The CHANNEL menu is displayed.
2. First press ◄/► to select the main
menu item. The submenus are displayed
underneath.
3. Press ▼ to select a submenu. The first row
of the submenu is highlighted.
4. Press OK or ► to access the submenu.
5. Press TV MENU to return to the main menu.
Submenus
• Press ▲/▼ to select a submenu item. Here
you can
- press ◄/► to change settings or
- press OK to access a further setting window
and then press ◄/► to change the settings.
Return to Main Menu
You must exit the active submenu to select a
further item from the main menu.
• Press TV MENU to return until the headline in
the main menu is highlighted (e.g. CHANNEL).
• In the submenu press ▲ until the headline in
the main menu is highlighted (e.g. CHANNEL).
Exit Menu
• Repeatedly press TV MENU to return step
by step or press EXIT. Your new settings are
saved.
PLEASE NOTE: The menu fades out if no
setting is changed within a few seconds.

6. SEARCH AND EDIT CHANNELS

Your TV set can receive DVB-T signals and
traditional analog signals (e.g. via cable). You
reception after automatic search depends on
your antenna connection: your existing DVB-T
antenna for DVB-T reception or analog cable
connection. Both types can be stored in the
channel list – but generally you will only use
one reception type. For both types you have the
automatic and manual search functions.
• DVB-T stations are displayed with DTV.
• Analog stations are displayed with ATV (TV).