Dtv Manual Scan; Atv Manual Scan; Edit Channels - AEG CTV 2601 LCD/DVB-T Bedienungsanleitung

ENGLISH
58

7.2 DTV Manual Scan

1. Press the TV MENU button to display the OSD main menu.
2. Press the arrow button
3. Press the arrow buttons / to select a channel. The signal strength of the selected
channel is displayed. If no signal is received on the selected channel NO SIGNAL is
displayed. In this case select a different channel.
4. Press OK to start the manual scan.
5. After finishing the manual scan the number of found channels is displayed.
Press EXIT to close the window.

7.3 ATV Manual Scan

To receive analogue channels an analogue antenna signal (e.g. cable tuner) must be connected. Analogue channels are
displayed as ATV (TV) in the OSD menu. If previously DVB-T channels were saved the new analogue channel is added to
this list. The digital channels are not overwritten.
1. Press the TV MENU button to display the OSD main menu.
2. Press in CHANNEL menu to select ATV Manual Tuning and press OK.
3. Under Storage To press / to select the position in the channel list for the new
analogue channel.
4. Press / to highlight Search.
5. Press / , to start the manual scan. The changing frequency is displayed during the
scan. After a channel is found the sound is activated again.
6. Press the red button to save the channel.
7. To scan for additional channels first select a position in the channel list for the new
analogue channel with Storage To and then restart the scan.
In this menu you can also perform the following settings: System: is generally not changed. Current CH: shows which
channel is active in the background. Press / to change. Fine-Tune: Press / to change the frequency in small steps.
Frequency: Shows the current frequency.

7.4 Edit Channels

After auto scan all channels are saved in found sequence. You can add channels in the favourite list (FAV) or change the
sequence by moving or skipping channels.
Move Channel
1. Press the TV MENU button to display the OSD main menu.
2. Press in CHANNEL menu to select Programme Edit and press OK.
3. Press / to highlight the channel to be moved.
4. Press the yellow button. The channel is marked yellow.
5. Press the numeric buttons to enter the programme.
6. Press OK twice to save the channel in the desired position.
7. Repeat steps 5-6 to move further channels.
8. Press EXIT to exit the menu and save the changes.
Skip Channel
The highlighted channels can only be accessed with the numeric buttons 0-9. Channel selection with CH +/- is no longer
possible.
1. Press the TV MENU button to display the OSD main menu.
2. Press in CHANNEL menu to select Programme Edit and press OK.
3. Press / to highlight the channel to be skipped.
4. Press the blue button.
5. Press EXIT to exit the menu and save the changes.
To unlock the channel select the highlighted channel and press the blue button again.
to select item DTV Manual Tuning and press OK.
is displayed behind the channel name.