Basic Operation; Turn Tv Set On/Off; Select Channel; Adjust Volume - AEG CTV 3202 LCD Bedienungsanleitung, Garantie

6. Basic Operation

All settings can be performed comfortably with the remote control and the OSD menu. The basic functions can also be
performed with the buttons on the TV set. In this user manual we generally describe operation with remote control.

6.1 Turn TV Set On/Off

• Turn the device on with the power switch on the left rear of the device. It starts in the previously selected mode and
selected source. In standby mode (status indicator red) press the button on the remote control. The control light
lights up blue and the device is turned on.
• Perss the button on the remote control to turn the device off again (standby mode).
• Operate the power switch on the left rear side to completely turn off the device.
NOTE:
Turn the TV set off completely if you are not using it, as it uses a small amount of power in standby mode. Even after
turning the device off with the main switch it is not completely disconnected from mains power supply. For this you
must disconnect the power plug from the wall outlet.

6.2 Select Channel

• Press the CH / buttons or numeric buttons 0-9 to select the desired channel.
• Press the button on the remote control to return to the previous channel.
• Press ENTER to display the channel list. Press the arrow buttons (
to display the channel on screen.

6.3 Adjust Volume

• Press the VOL / buttons to adjust the volume.
• Press the , button to temporarily mute the sound. Press or VOL

6.4 Shortcuts

SOURCE Select external device
PMODE Select picture mode
SMODE Select sound mode
SLEEP Set sleep timer
ASPECT Select aspect ratio
TEXT Access Teletext
DISPLAY Display channel information

6.5 OSD Menu Structure

The OSD (On Screen Display) menu serves to select and set the different functions
Submenus
• Press the arrow buttons / to select a submenu item. Here you can:
- either perform settings with the arrow buttons / .
- or press OK to open a further setting window and perform settings here with the arrow buttons / .
to unmute the sound again.
1. Press the MENU button to display the OSD menu. See main menu
items below. You can see the items of the main menu at the top.
2. First press / to select the desired main menu item. The submenus
are displayed next to them.
3. Press / to select a submenu and press ENTER to confirm.
4. Press the MENU button to return to the main menu.
English
) to highlight a channel and press ENTER
29