Program The Esc With The Set Button - Carson Virus 4.0 Brushless Betriebsanleitung

4S – Program the ESC with the Set Button
The following is a flowchart sample for pro-
gramming the Dragster S6 controller.
Hold the set key,
switch on the ESC
Hold on the button
ca. 8 seconds
Hold on the button
for 1 time
Hold SET key for 3 seconds
for 2 times
Hold SET key for 3 seconds
for 3 times
Hold SET key for 3 seconds
for 4 times
for 5 times
500409050-51_VIRUS4_Brushless_L3.indd 33
Enter the corresponding
programmable adjustment, the
the times present the current
value of this item.
Enter the 1st adjustment
"Running Mode"
Release
SET key
Enter the
2nd adjustment
"Drag Brake Force" in
neutral position
Release
SET key
Enter the
3rd adjustment
Release
SET key
Enter the
4th adjustment
"Accelleration mode"
Release
SET key
Enter the 5th adjustment
„Max. braking force"
Release
SET key
CARSON Virus 4.0 Brushless 500409050 / 500409051
Note:
In the program process, when the LED is flashing, the motor will emit
"Beep" tone at the same time.
Press the SET key to choose
the programmable value, the
times, the times present the
serial number of the value
you are choosing.
= 1 sec
= 3 sec
"Forward with brake"
"Forward/reverse with brake"
"Forward and reverse"
Press
SET key
Press
SET key
Press
SET key
Press
SET key
Press
SET key
"deactivated"
More selection see table on page 31.
Attention
Value Blinking
frequency
1
2
3
4
5
6 +
7 +
8 +
G
33
17.02.14 09:21