Child Safety Lock - Silvercrest SDI 2800 A1 Handbuch

Child safety lock

To prevent unauthorised switching on or setting modifi cation, for instance by
children, this appliance is fi tted with a child safety lock.
NOTE
► It does not matter whether you activate the child safety lock using the but-
tons "+" i and "-" z or using the buttons "+" z and "-" i. All buttons,
except the "ON/OFF" button e, are always locked.
NOTE
► You can also the child safety lock as a safe-wipe function:
Before you wipe the buttons with a damp cloth, activate the child safety
lock. This helps avoid any inadvertent activation of buttons.
When the appliance is in operation:
Press the "+" q/i and "-" 9/z buttons together. "Loc" (LOCK), alternating
■
with the set power level/temperature, will show on the display 0/u.
Now all buttons, including the "ON/OFF" button e are locked.
If a single hob 1/2 is activated, the respective display 0/u shows
■
"Loc" (LOCK), alternating with the set power level/temperature. "Loc" is
permanently shown on the display 0/u of the hob 1/2 that is not in
operation.
To deactivate the child safety lock, press the "+" q/i and "-" 9/z buttons
■
together. The buttons can now be activated again.
When the appliance is switched off :
Press the "ON/OFF" button e to switch on the appliance.
■
Press the "+" q/i and "-" 9/z buttons together. "Loc" (LOCK) appears
■
on the display 0/u. Now, all buttons, except the "ON/OFF" button e
are locked. After 10 seconds, the appliance will switch itself off .
If you press the "ON/OFF" button e again in order to switch the appli-
■
ance on, the display shows 0/u "Loc", and the buttons remain locked. To
deactivate the child safety lock, press the "+" q/i and "-" 9/z buttons
again together. The buttons can now be activated again.
When the timer is in operation:
Press the "+" q/i and "-" 9/z buttons together. "Loc" (LOCK), alternating
■
with the current timer time, will show on the display 0/u.
To deactivate the child safety lock, press the "+" q/i and "-" 9/z buttons
■
again together. The buttons can now be activated again.
SDI 2800 A1 GB │ IE │ NI │ CY │ 13 ■