Cleaning; Troubleshooting; Safety Notices; Fault Indications - Caso Vario Power 3400 2250 Originalbetriebsanleitung

Induktionskochfeld

Inhaltsverzeichnis

Verfügbare Sprachen

13.2 Cleaning



Ceramic hob, Housing and Operating Panel

• Clean the hob, the housing of the device and the operating panel with a soft, slightly

damp cloth.

Attention

► In order not to damage the plastic components, do not use any solvent-based cleaning

detergents such as, for example, petrol.

This chapter provides you with important notices with regard to operating the device.

Observe the following notices to avoid dangers and damages:

Attention

► Only qualified electricians, who have been trained by the manufacturer, may carry out

any repairs on electrical equipment.

► Improperly performed repairs can cause considerable dangers for the user and

damages to the device.

In the event of a fault, an error code will appear in the display; it describes the cause of the

fault.

Display

Description

E05

Overheating Protection

This means that the temperature had increased to a temperature of 150°C. In

this case the device turns off automatically in order to avoid damages.

In case of "E05" please pull the power plug in order to reset the device. After

this you can use it again as usual.

► If error messages continue to be displayed after an extended waiting period or after

restarting the appliance, then it must be sent to Customer Service to be examined.

caso Vario Power 3400

Please note

Inhaltsverzeichnis