Temperature Mode; Timer; Powersharing Mode - Caso Vario Power 3400 2250 Originalbetriebsanleitung

• With the + / - Keys (5+6), you can change the settings at any time in a range from 1 –
12.
► We recommend to select the function "Power Mode" in case of steaming food or boiling
water for example. So the overheating protection "E05" will not be activated.
12.4.3

Temperature Mode

• Press the Function Key 2. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
• With the + / - keys, you can change the settings at any time in a range from 60 – 240°C.
(Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and 240°C)
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C. Otherwise the
overheating protection "E05" will be activated.
12.4.4

Timer

• Timer Function. After the selection of the temperature mode press the button Time 4.
until the corresponding control lamps blink. The display shows the number "0". With +/-
keys, you can now select the operating time in 1-minute intervals (up to max. 180
minutes). Once the time is up, an acoustic signal sounds and the device automatically
goes into standby mode.
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
12.4.5

Powersharing Mode

• If both induction fields are operated, the boards will share over power sharing function
levels as follows:
left 12 11 10
right 5 6 7
caso Vario Power 3400
Please note
Please note
Please note
9 8 7 6 5
8 9 10 11 12
4 3 2 1
12 12 12 12
42