Using The Fader Function; Listening To The Radio; Auto Tuning; Manual Tuning - Denon AVR-2807 Bedienungsanleitung

Basic Operation

Using the fader function

With this function, the volume of all the front side speakers or all
the rear side speakers can be adjusted (attenuated) at once.
1
CH SEL/ENTER
Press .
2 D D H H
CH SEL/ENTER
Press or to select "Fader".
3 F F
Press to attenuate the volume of all the front
G G
side speakers, to attenuate the volume of all the
rear side speakers.
The fader function does not affect the subwoofer.
It is possible to adjust so that the volume of the speaker
whose volume is the lowest is –12 dB.
2
3

Listening to the radio

Check that the remote control unit is set to "AMP".

Auto tuning

1 < FUNCTION >
Either turn or press
select "TUNER".
2
[BAND]
Press to select "AM" or "FM".
3
[MODE]
Press to set the auto tuning mode.
• The "AUTO" indicator lights.
4
[TUNING]
Press .
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the
"Manual tuning" operation.

Manual tuning

< FUNCTION >
1
Either turn or press
select "TUNER".
2
[BAND]
Press to select "AM" or "FM".
3 [MODE]
Press to set the manual tuning mode.
Check that the display's "AUTO" indicator turns off.
4
[TUNING]
Press to tune in the desired station.
The frequency changes continuously when the button is
held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.
35
ENGLISH

Preset memory

1
Use the "Auto tuning" or "Manual tuning"
operation to tune in the station to be preset in the
memory.
[TUNER]
to
2
[MEMORY]
Press
3
[SHIFT]
Press to select the desired memory block
(A to G).
4
[CHANNEL]
Press
channel (1 to 8).
5
[MEMORY]
Press
• Store the station in the preset memory.
• To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
• The memory block can also be selected by pressing [SHIFT].
[TUNER]
to
ENGLISH
Basic Operation
.
to select the desired preset
again.