Input Selection And Av Connections; Input Signal Selection - Toshiba CT-90274 Bedienungsanleitung

C3000P Eng OM 26/1/07
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7
for a clear view of the back connection recommendations.
Most media recorders and decoders send a signal
through the SCART lead to switch the television to the
correct Input socket.
Alternatively press the external source selection button
B
until the picture from connected equipment is shown.
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (EXT3C).
An S in the display e.g. B
input is set for an S-Video signal.
Input selection
Use the Input Selection if the television does not switch
over automatically.
At any time by pressing
1
screen showing all stored programmes and
external equipment. Use
and OK to select.
1
HDMI2
HDMI1
3C
B
2
B
1
B
4
3
2
HDMI™ displays equipment connected to Input
HDMI on the back of the television. It is designed
for best performance with 1080i high definition
signals.
PC displays a computer connected to Input
RGB/PC on the back of the television.
4:48 pm Page 23
Input selection and
AV connections
2S (EXT 2S), indicates the
B a list will appear on
f and e to highlight
BBC1
DVD
CH4
ITV
BBC2

INPUT signal selection

This specifies the type of signal going into SCART 2 (EXT2)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
MENU Back
With z or x
2
required input for EXT2.
PC/HDMI1 audio
HDMI1 audio
EXT2 input
Woofer
Back
MENU
If the colour is missing try the alternative setting.
23
e until
SET UP
English
UK
OK
OK
OK
OK
EXIT Watch TV
select either AV or S-VIDEO as the
AV connection
PC
Digital
AV
Internal
Watch TV
EXIT
1/2