Pc Setting - Picture Position, Clock Phase, Sampling Clock, Reset - Toshiba CT-90274 Bedienungsanleitung

C3000P Eng OM 26/1/07
PC settings – picture position, clock phase,
Picture position
Connect the PC (as shown in the 'Connecting a PC'
section) and ensure that a picture is showing on the
television screen. The picture position may now be adjusted
to suit personal preference.
Press B to select PC, then select PC Setting
1
from the SET UP menu.
Language
Country
AV connection
PC Setting
MENU Back
Press OK. Press
2
then z or x to adjust the settings.
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
Back
MENU
Clock phase
The Clock phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
phase.
Use z or x to adjust until the picture clears.
3
4:48 pm Page 22
sampling clock, reset
SET UP
English
UK
OK
OK
EXIT Watch TV
f and e to select an option,
PC Settings 1/2
0
– 5
0
– 5
0
0
Watch TV
EXIT
e until PC Setting is
e to highlight Clock
Sampling clock
Adjusting the Sampling clock alters the number of pulses
per scan, this will clear vertical lines on the screen.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
Sampling clock.
Horizontal position
Horizontal width
Vertical position
Vertical height
Clock phase
Sampling clock
MENU Back
Use z or x to adjust until the picture clears.
3
To return to the original factory settings.
In the SET UP menu press
1
highlighted.
Press OK to select, then
2
Press OK.
3
NOTE: When a PC is connected using HDMI none of
these functions will be available.
22
e until PC Setting is
e to highlight
PC Settings 1/2
0
– 5
0
– 5
0
0
EXIT Watch TV
Reset
e until PC Setting is
e to highlight Reset.