Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 7
for a clear view of the back connection recommendations.
Most media recorders and decoders send a signal
through the SCART lead to switch the television to the
correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
B
This button must be used to view equipment connected
using the COMPONENT VIDEO INPUT (EXT3C).
An S in the display e.g.
2S (EXT 2S), indicates the
B
input is set for an S-Video signal.
Input selection
Use the Input Selection if the television does not switch
over automatically.
At any time by pressing
1
screen showing all stored programmes and
external equipment. Use
and OK to select.
1
HDMI2
HDMI1
3C
B
B
2
B
1
4
3
2
HDMI™ displays equipment connected to Input
HDMI on the back of the television. It is designed
for best performance with 1080i high definition
signals.
PC displays a computer connected to Input
RGB/PC on the back of the television.
Input selection and
AV connections
a list will appear on
B
and
to highlight
f
e
BBC1
DVD
CH4
ITV
BBC2
INPUT signal selection
This specifies the type of signal going into SCART 2 (EXT2)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU
With
or
z
2
required input for EXT2.
PC/HDMI1 audio
HDMI1 audio
EXT2 input
Woofer
MENU
Back
If the colour is missing try the alternative setting.
23
until
e
SET UP
English
UK
OK
OK
OK
OK
Watch TV
EXIT
select either AV or S-VIDEO as the
x
AV connection
PC
Digital
AV
Internal
EXIT
Watch TV
1/2
Werbung
Inhaltsverzeichnis
