Toshiba CT-90274 Bedienungsanleitung Seite 22

C3000P Eng OM 26/1/07
PC audio
In order to receive sound from a connected PC, plug the
audio cable into the back of the television (as shown in
'Connecting a computer' section), then use the
PC/HDMI1 audio settings.
In the SET UP menu press
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU
Highlight PC/HDMI1 audio then use
2
the PC option.
PC/HDMI1 audio
HDMI1 audio
EXT2 input
Woofer
Back
MENU
NOTE: Selecting the PC option will force HDMI
into digital audio.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
4:48 pm Page 24
Input selection and
AV connections
e until
SET UP
1/2
English
UK
OK
OK
OK
OK
Watch TV
EXIT
x to select
AV connection
PC
Digital
AV
Internal
Watch TV
EXIT
continued
HDMI1 audio HDMI audio
If the connected HDMI source does not support digital
audio, plug the audio cable into PC/HDMI1 audio on the
back of the television (as shown in the 'Connecting a
computer' section), then use the HDMI1 audio settings.
In the SET UP menu press
1
AV connection is highlighted, then press OK.
Language
Country
Auto tuning
Manual tuning
AV connection
Picture position
Back
MENU
In the AV connection menu press
2
PC/HDMI1 audio and using
Then highlight HDMI1 audio and using
3
select Auto., Digital or Analogue.
PC/HDMI1 audio
*
HDMI1 audio
EXT2 input
Woofer
Back
MENU
If the sound is missing select an alternative
setting.
NOTE: HDMI1 supports digital and analogue
sound, HDMI2 is digital sound only.
Certain formats of DVD disk may not output from
this TV (32/44.1/48kHz and 16/20/24 bits are
acceptable).
24
e until
SET UP
1/2
English
UK
OK
OK
OK
OK
Watch TV
EXIT
e to highlight
x select HDMI1.
z or x
AV connection
HDMI1
Digital
AV
Internal
Watch TV
EXIT