Sorting Programme Positions - Toshiba CT-90274 Bedienungsanleitung

C3000P Eng OM 26/1/07
Tuning the television using Quick Setup,
Before switching on the television put your decoder and media recorder to Standby if they are connected.
To set up the television use the buttons on the remote control as detailed on page 6.
Connect the television to the mains power and
1
i
press the button. The Quick Setup screen will
appear.
Select your language.
Language
Watch TV
EXIT
Using z or x select your language, then press
2
OK.
Then press z or
3
press OK.
To start Auto tuning press OK.
4
Searching
Channel : C22
Stop
EXIT
The search will begin for all available stations.
The slide bar will move along the line as the
search progresses.
You must allow the television to complete
When the search is complete the television will
automatically select programme position 1. This
may not be a clear picture or the signal may be
weak, so the station order can be changed using
Manual tuning which will appear on the screen.
Prog. Channel
1
2
3
4
5
6
Select
OK
Back
MENU
4:48 pm Page 10

sorting programme positions

Quick Setup
English
Next
OK
x to select your country and
Auto tuning
Station : BBC1
the search.
Manual tuning
Station
C22 BBC1
C28 BBC2
C25 ITV
C32 CH4
C68
C69
Sort
Watch TV
EXIT
With the list of stations now showing use
5
to highlight the station you want to move and
press x .
The selected station will be moved to the right of
the screen.
Prog.
1
2
3
4
5
6
Store
Back
MENU
Use f or e
6
preferred position. As you do so the other stations
will move to make room.
Press x to store your move.
7
Repeat as necessary, then press EXIT.
If the television cannot be connected to a media
recorder/decoder with a SCART lead or if a
station on another system is required, use
Manual tuning to allocate a programme
position, see page 11.
10
f or
Manual tuning
Channel Station
C22 BBC1
C28 BBC2
C25 ITV
C32 CH4
C68
C69
Watch TV
EXIT
to move through the list to your
e