Input Selection And Av Connections; Input Selection; Input Signal Selection; Hdmi1 Audio - Toshiba REGZA AV55 DIGITAL-Serie Bedienungsanleitung

CONTROLS AND FEATURES
Input selection and AV
connections
See page 7 for a clear view of the back connection
recommendations.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively press the external source selection button
until the picture from connected equipment is shown.
This button must be used to view equipment connected using
the COMPONENT VIDEO INPUT (EXT3) and the VIDEO INPUT
(EXT4).
o
An S in the display e.g. 2S (EXT 2S), indicates the input is set
for an S-Video signal.

Input selection

Use the Input Selection window if the television does not switch
over automatically.
a
At any time by pressing
showing all stored programmes and external
U
equipment. Use and
select.
Inputs
DTV
HDMI1
HDMI2
ATV
HDMI™ displays equipment connected to Input HDMI
on the back of the television.

INPUT signal selection

This specifies the type of signal going into SCART 2 (EXT2) on
the back of the television. Please refer to the manufacturers
instructions for the connected equipment.
a
In the SETUP menu press
highlighted, then press
o
o
a list will appear on screen
Q
u
to highlight and to
1
2
3
4
u
until AV Connection is
Q
.
b
I i
With or select either AV or S-VIDEO as the
required input for EXT2.
AV Connection

HDMI1 audio

EXT2 Input
Lip Sync
If video colour is absent, try the alternative setting.
HDMI1 Audio
If the connected HDMI source does not support digital audio,
plug the audio cable into HDMI1 (AUDIO) on the back of the
television (as shown in the 'Connecting an HDMI™ or DVI device
to the HDMI input' section), then use the HDMI1 Audio setting.
a
In the AV Connection menu press
HDMI1 Audio and using
or Analogue.
If the sound is missing select an alternative setting.
NOTE: HDMI1 supports digital and analogue sound,
HDMI2 is digital sound only.
Certain DVD disk formats may not output from this TV
(32/44.1/48kHz and 16/20/24 bits are acceptable).

Lip Sync Latency

Lip Sync can synchronize the sound and picture. This feature is
only available for HDMI equipment compatible with Lip Sync.
a
In the AV Connection menu press
Sync.
b
I i
Using or select On or Off.
HDMI, the HDMI logo, and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing,
LLC.
32
Auto.
AV
On
u
to highlight
I i
or select Auto., Digital
u
to highlight Lip