Colour Management; Active Backlight Control; Base Colour Adjustment; Cinema Mode - Toshiba CT-90274 Bedienungsanleitung

C3000P Eng OM 26/1/07
3D Colour management
When 3D Colour management is selected it allows the
'Base colour adjustment' feature to become available.
In the PICTURE menu press
1
3D Colour management.
Picture settings
3D Colour management

Base colour adjustment

Active Backlight Control

Cinema mode

Back
MENU
Press z or x to select On or Off.
2
Base colour adjustment
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
external source.
In the PICTURE menu press
1
Base colour adjustment, then press OK.
Picture settings
3D Colour management
Base colour adjustment
Active Backlight Control
Cinema mode
Back
MENU
Press z or x to select an option, then
2
adjust the settings.
4:48 pm Page 19
Picture controls
e to select
PICTURE
OK
On
OK
On
On
Watch TV
EXIT
e to select
PICTURE
OK
On
OK
On
On
Watch TV
EXIT
x to
continued
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
MENU Back
To return to the original factory settings select
Reset and press OK.
Active Backlight Control
When Active Backlight Control is activated it will
automatically optimise the backlighting levels for
In the PICTURE menu press
1
Backlight Control.
Picture settings
3D Colour management
Base colour adjustment
Active Backlight Control
Cinema mode
Back
MENU
Press z or x
2
Cinema mode
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema mode can help correct
this by smoothing out the picture.
In the PICTURE menu press
1
mode.
Press or
z x
2
NOTE: When a DVD with subtitles is being played
this mode may not work correctly.
19
Base colour adjustment
Hue Saturation Brightness
+2 +6 +4
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
OK
EXIT Watch TV
dark scenes.
e to select Active
PICTURE
OK
Off
On
On
Watch TV
EXIT
to select On or Off.
e to select Cinema
to select On or Off.