Maintenance - PANCONTROL PAN 200A+ Bedienungsanleitung

9. Maintenance

Only authorized service technicians may repair the instrument.
Changing the battery(s)
Replace the battery(s) when the battery symbol or BATT is displayed on the LCD.
•
Open the battery or fuse compartment with a suitable screwdriver.
•
Replace the battery. Mind the correct polarity.
•
Close the battery compartment.
•
Disposal of the flat battery should meet environmental standards.
Remove the battery if the device is not used for a long time.
Cleaning
If the instrument is dirty after daily usage, it is advised to clean it by using a humid
cloth and a mild household detergent. Prior to cleaning, ensure that instrument is
switched off and disconnected from external voltage supply and any other
instruments connected. Never use acid detergents or dissolvent for cleaning.
EN 12